Hey Linda and Ross
I just wanted to tell you how much I appreciated the clock you sent me.  I got a hole saw from sears today and got it installed in the DASH of my 1300 VTX Honda.
With the insert you made for me the install was quite easy. I used a 1 3/8 hole saw to drill the dash, I centered the pilot hole on the Honda emblem then drilled from the back side first about half way thru the material and then finished drilling from the front side of the dash. The plastic dash drills very easy with the Bi-metal type hole saw even with a hand/portable drill.  Would have been easier if I'd had a drill press but I managed anyways.  The hole was slightly undersized, approximately   .053" which I was able to take a rat tail file to remove the little material needed to fit the insert into the dash.  I then used a little 5 minute apoxy on the back/underside  to secure the insert.
I've sent some pix, hope you can see what I've done and if anyone needs clarification of the process I'll be more than happy to email or call them about how I did mine.
I hope you all had an enjoyable Christmas and wish you a very prosperous New Year.
Sincerly John Jensen

Clock (choice of black or white dial) with Mounting Ring:

The mounting ring shown here is polished aluminum. Chrome is what we ship unless you request polished.